Acid Etch
Xcem’s NEW Acid Etch offers you the easy to use syringe and flowable/workable Etch that every dentist dreams of.
NEW Sky Blue colour
Strong Phosphoric Acid for Excellent Etching of tooth enamel/dentine
Water-Based Phosphoric Acid gel. Dispensing through syringe with pre-bent small gauge applicator tips.
Xcem’s Acid Etch offers precise placement of gel even in relatively inaccessible areas.
The Etching Gel(Acid Etch) enclosed is water based 35°C-37°C Phosphoric acid gel, used for etching enamel and dentin to increase adhesion of bonding agent adhesives to tooth structure and restorative materials. The gel is blue in color for easy identification against tooth structure.
Dispensing from a syringe through pre-bent small gauge needles, it offers precise placement of gel even in relatively inaccessible area.
DIRECTIONS FOR USE:
Prepare tooth and cleanse the enamel surface tube etched with non-oil containing Prophy Paste.
Rinse and dry thoroughly.
Using the syringe with a dispensing needle attached, apply the gel directly to the tooth. Recommended etching time for enamel is 20 seconds.
Rinse off Acid Etch with plenty of water.
Do not disturb this surface.
Leave surface wet or dry surface with clean uncontaminated air, depending on the instructions for use for the bonding system you are using.
NOTE: On primary teeth or teeth with high Fluoride content a 60-120 seconds Acid Etch is recommended.
Rinse thoroughly for 20 seconds.
Acid Etched enamel should have a chalky appearance.
WARNING: Acid Etch contains Phosphoric acid (37%) and it is highly corrosive. If Acid Etch comes in contact with hands or soft tissues, rinse off immediately with plenty of water.
STORAGE: Do not store at temperature exceeding
25°C and keep away from direct sunlight.
Keep bottle tightly closed in a well-ventilated area.
Carebond
Single component bonding liquid contains dispersed acrylates and monomers in a violate base.
Used for the restoration of all anterior and posterior class III, V and II.
- High performance bonding liquid for composite
- A volatile base
- Light cure composite
- Easy to apply
PRODUCT DESCRIPTION: Carebond is one component bonding liquid for methacrylate restorations containing dispersed acrylates and monomers and initiators in volatile base. It can be used following acid etching with phosphoric acid..
INDICATION:
- Bonding for direct & indirect light cure composite restorations/compomers.
- Adhesive for core build up materials repair restorative for composites, compomers, ceramic veneers and all ceramic restorations.
- Treatment of hypersensitive cervical erosions.to use as varnish to protect glass ionomers sealer for crack, deficiencies of teeth and restorations.